Radial sample load distribution under overload conditions: Analytical scale columns

The homogeneity of the sample load across the radial cross section of analytical scale columns was determined when operating under overload conditions. The study was performed using active flow technology columns operating in parallel segmentation mode. The outlet segmentation ratio was varied to enable different volume fractions of mobile phase, and thus sample, to elute from the peripheral and central flow regions of the column. The amount of solute exiting the peripheral and radial central exit ports was determined as a function of the flow segmentation ratio. The experimental data using an analytical scale column with dimensions, 100?×?4.6?mm, indicated that the sample load distribution was essentially uniform as a function of the column radial cross section.     

基于集成运放的太阳能控制器

现有光伏系统的控制器普遍选用微控制器为核心,为使之与电子技术课程教学案例开发相结合,提出采用集成运放替代微控制器的智能太阳能控制器方案,并以直流12V/10A小功率应用为研究实例。实验结果表明该控制器方案可行,且电路简单、成本低廉,适用于实验教学与课程设计。     

State of the art and research development prospects of energy and resource-efficient environmentally safe chemical process systems engineering

In this focus overview, the main types and directions of engineering, methods and techniques of intensification of chemical process systems (CPS) and process optimization of energy- and resource-efficient processes for the representative production of titanium compounds, mining waste processing systems, electrochemical coating technologies, combined technologies for the treatment of industrial effluents and energy-and resource-efficient technologies for cleaning soils from petroleum and chemical pollution products are reviewed. The following issues have been discussed: methods of complex assessment of production energy efficiency and software and information support for automated synthesis of optimal energy-efficient regenerative heat exchange systems using pinch analysis; methods and algorithms for fractal-statistical characteristics analysis of nonstationary gas flows in complex gas pipelines; methods of ecological and economic optimization of production, infrastructure supply chains; methods for assessing and preventing the dangerous environmental impact assessment of chemical pollution; organization and logistics management of business processes engineering for improving the energy efficiency of plants; engineering of problem oriented computer systems, heuristic-computational models and algorithms for intelligent integrated logistics support of the equipment life cycle; engineering developments in the field of digital transformation of energy-efficient CPS and technological production systems; application of methods for optimizing reliability factors optimization, digitalized risk and safety management in the engineering of energy- and resource efficient CPS.     

Examination of the Degreasing of Metal Surfaces by the Use of a Plasma Torch

Metal surfaces can be degreased via a combustion reaction upon the metal surface by the use of a plasma torch jet. The required energy and the reaction rate of the combustion reaction are examined here. It turns out that the reaction rate can limit the cleaning performance. In such case, the cleaning performance is not improved at higher powers. It is suggested to increase the temperature at which combustion takes place such that the cleaning performance can improve again at higher powers. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Shadow-casted ultrathin surface coatings of titanium and titanium/silicon oxide sol particles via ultrasound-assisted deposition

Ultrasound-assisted deposition (USAD) of sol nanoparticles enables the formation of uniform and inherently stable thin films. However, the technique still suffers in coating hard substrates and the use of fast-reacting sol–gel precursors still remains challenging. Here, we report on the deposition of ultrathin titanium and titanium/silicon hybrid oxide coatings using hydroxylated silicon wafers as a model hard substrate. We use acetic acid as the catalyst which also suppresses the reactivity of titanium tetraisopropoxide while increasing the reactivity of tetraethyl orthosilicate through chemical modifications. Taking the advantage of this peculiar behavior, we successfully prepared titanium and titanium/silicon hybrid oxide coatings by USAD. Varying the amount of acetic acid in the reaction media, we managed to modulate thickness and surface roughness of the coatings in nanoscale. Field-emission scanning electron microscopy and atomic force microscopy studies showed the formation of conformal coatings having nanoroughness. Quantitative chemical state maps obtained by x-ray photoelectron spectroscopy (XPS) suggested the formation of ultrathin (<10 nm) coatings and thickness measurements by rotating analyzer ellipsometry supported this observation. For the first time, XPS chemical maps revealed the transport effect of ultrasonic waves since coatings were directly cast on rectangular substrates as circular shadows of the horn with clear thickness gradient from the center to the edges. In addition to the progress made in coating hard substrates, employing fast-reacting precursors and achieving hybrid coatings; this report provides the first visual evidence on previously suggested “acceleration and smashing” mechanism as the main driving force of USAD.     

繁昌窑址附近多种瓷土成分分析

繁昌窑青白瓷胎体配方工艺一直停留在理论推理阶段，尚未有确凿的测试数据和模拟实验加以证实。为深入探究繁昌窑的胎料配方工艺，选取了繁昌窑址附近的多种瓷土样品进行了测试分析，并采用了古代制瓷工艺进行了模拟烧制。主要运用了波长色散X射线荧光光谱法(WDXRF)、红外光谱（FTIR）和X射线衍射（XRD）等光谱分析方法对瓷土成分进行测试；借助同步热分析（TG-DSC）对样品烧造温度进行了探索；通过模拟烧制陶瓷样品，对繁昌窑青白瓷的烧制工艺进行了研究，并对烧制的陶瓷样品进行显微结构分析。研究表明，繁昌窑附近的几种瓷土无论是单独制胎还是添加高岭土混合制胎，其烧成温度皆接近古代繁昌窑青白瓷的烧制温度。繁昌窑附近的瓷土是可以作为制作古代青白瓷的原料之一，但由于其中的铝含量较低，不能单独用来制作青白瓷胎体的原料，繁昌窑青白瓷在制作过程中应添加了其他富铝类原料。该研究对探索古代繁昌青白瓷的生产工艺及其蕴含的科学价值，提升繁昌窑在中国陶瓷工艺技术发展史上的地位等具有重要的学术意义，并可为现代陶瓷产业技术改进提供有益启示。     

冷冻电镜技术——2017年诺贝尔化学奖介绍

介绍了2017年诺贝尔化学奖的3位获得者在冷冻电镜领域的主要贡献，同时介绍了冷冻电镜技术的用途、一般工作流程和其局限性，以及中国学者在冷冻电镜技术应用研究中的贡献。     

Combined protein A imprinting and cryogelation for production of spherical affinity material

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle‐containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein‐imprinted cryogel beads. The protein‐imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A‐imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.     

Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

This paper studies and compares the effects of pull-pull and 3-point bending cyclic loadings on the mechanical fa- tigue damage behaviors of a solder joint in a surface-mount electronic package. The comparisons are based on experimental investigations using scanning electron microscopy （SEM） in-situ technology and nonlinear finite element modeling, respec- tively. The compared results indicate that there are different threshold levels of plastic strain for the initial damage of solder joints under two cyclic applied loads; meanwhile, fatigue crack initiation occurs at different locations, and the accumulation of equivalent plastic strain determines the trend and direction of fatigue crack propagation. In addition, simulation results of the fatigue damage process of solder joints considering a constitutive model of damage initiation criteria for ductile materials and damage evolution based on accumulating inelastic hysteresis energy are identical to the experimental results. The actual fatigue life of the solder joint is almost the same and demonstrates that the FE modeling used in this study can provide an accurate prediction of solder joint fatigue failure.     

利用手持技术数字化实验测定中和反应化学计量比*

化学计量比在中学教学及实际生产中有着重要应用,本研究针对化学计量比概念教学存在的不足,以手持技术TQVC概念认知模型为理论依据,设计实验测定中和反应的化学计量比。基于等摩尔连续变化法,本实验借助温度传感器测定不同物质的量之比反应物反应后的温度变化数据,找出最大温度变化差值对应的反应物物质的量之比,即化学计量比,帮助学生从定量的角度理解化学计量比概念。